Confirm enclosure size, screen path, and room clearance
Use this compact guide to see what the enclosure path includes, what is still optional, and which room measurements should be checked before checkout.
What this product is for
The Curved enclosure kit is for premium simulator rooms that need an immersive curved impact-screen path and careful projector planning.
Core equipment included
Premium or High-Contrast Gray curved impact screen path
BlackStop fabric
Steel 2 inch fittings
Ball bungees and zip ties
Foam insert kit
How to use this page
Choose the enclosure size and screen material that match the room, then add only the pipe, mat, projector, launch monitor, or accessory items your setup actually needs.
What you configure above
Use the builder and options above to finalize size, screen material, pipe path, and optional accessories that match the room.
Add only what the setup needs
Add the curved pipe kit if you want pre-cut marked 2 inch EMT pipes.
Add electronic mounts, back cover, baffles, turf, projector, launch monitor, computer, or install/service items only when selected separately.
Confirm image warping needs before selecting the projector path.
Not included unless selected
2 inch EMT pipe unless a pipe kit is selected
Back cover, safety baffles, and electronic mounts unless selected
Projector, launch monitor, software, or computer unless selected
Warping software unless selected or supplied separately
Installation or custom service unless selected
These are only included when selected above or clearly listed on this product page.
Room-fit checklist
Allow 2-3 in of side buffer and 6 in above the curved enclosure.
Plan at least 10 ft from tee to impact screen and 12-16 in behind the screen.
Measure projector distance to the leading edge of the curved screen closest to the golfer.
Planning note
Measure the finished room, not just the desired screen size. Confirm swing clearance, enclosure outside dimensions, screen distance, and rear screen clearance.
Best room fit
Best for larger dedicated residential or commercial bays where a panoramic curved screen is desired and projector warping can be planned correctly.
Confirm height, width, depth, curve clearance, top buffer, side buffer, projector placement, and any warping software requirement before checkout.
General specs
Frame type2 inch EMT curved frame path
Standard sizes9 ft x 14 ft through 10 ft x 17 ft
Depth options8 ft, 10 ft, or 15 ft
Custom range102-120 in H, 144-240 in W, 82-240 in D
Top buffer6 in recommended above enclosure
Projector noteOne projector can be used; warping software may be required
How to use these specs
Specs describe the enclosure path. Screen material, pipe kits, projector placement, turf, launch monitor placement, and computer needs should still be confirmed for the final room plan.
Shipping, support, and returns
Carl's Place items can ship in multiple cartons, and some larger or freight items may require lift-gate planning. Return eligibility can vary by product condition, custom sizing, and whether the item has been opened or installed. Curved pipe kits can ship freight; lift-gate should be planned when the recipient cannot unload palletized boxes.
Ask before checkout
Contact Golf Sim Genies before checkout if any room measurement, custom size, freight need, or accessory compatibility is unclear.
Carl's Place Curved Golf Simulator Enclosure Kit with Impact Screen
Enclosure details organized by what matters before checkout: room fit, size and material choices, protection add-ons, setup notes, and shipping support.
Carl's Place Curved Golf Simulator Enclosure Kit with Impact Screen
Use this enclosure page to confirm the bay footprint, screen or net choice, protection needs, and any separate simulator components you plan to pair with it.
Room clearance: Plan for safe swing space, at least 10 feet from tee to impact screen, and 12-16 inches of clear space behind the screen when using an impact screen.
Frame buffer: DIY and PRO enclosures need 2-3 inches of buffer on the sides and top; Curved enclosures need 2-3 inches on the sides and about 6 inches above.
Setup care: Use clean, unscuffed white golf balls and clean clubs to help protect the screen surface and reduce avoidable marks.
Full product details
Experience the ultimate indoor golf experience with the Carl's Place Curved Golf Simulator Enclosure Kit with Impact Screen, the first-ever do-it-yourself curved golf simulator kit. Featuring a unique curved impact screen, this enclosure creates an immersive environment with a wide field of view, offering unparalleled realism for any golf enthusiast.
Designed for durability and ease of installation, this kit is perfect for high-end residential setups or commercial spaces, bringing a luxurious and highly-immersive golfing experience to any setting.
Before purchasing, please view the Specifications tab to confirm that the Overall Enclosure Dimensions for the Listing Size that you have selected will be suitable for your space.
Please Note: The Carl's Place moveable crossbar is not compatible with the Carl's Place Curved Golf Simulator Enclosure.
Features
Curved Impact Screen The curved design enhances depth and realism, providing a wider field of view for an immersive golf simulation experience.
Durable Construction Crafted with premium materials, this enclosure is designed to withstand the rigors of regular indoor golf use.
User-Friendly Installation Step-by-step instructions make it easy to assemble, requiring only basic handy skills for setup.
Customizable Sizing Options Available in six standard sizes and customizable dimensions to fit your unique space.
Single Projector Setup Requires only one projector for seamless performance (additional software may be needed for custom image warping).
Overall Enclosure Dimensions are slightly larger than the Listing Size. Depths are true to size. Ensure the Overall Enclosure Dimensions will fit your space.
Buffer Space:Allow for 6"-7" of buffer space between the top of the Overall Enclosure Height and your ceiling for ease of assembly.
Custom Sizing: We can customize Curved Golf Simulator Enclosures down to the inch to fit a wide range of space requirements. Please contact support@golfsimgenies.com for a custom quote. Below is a full list of minimum and maximum Overall Enclosure Dimensions that are available.
EMT Requirements: Unless you have purchased the Pipe Framing Kitaccessory, you will need to purchase 2-inch EMT (electrical metal tubing) from your local hardware store to complete your frame. We will provide a pipe cut sheet that incudes the exact EMT dimensions that you will need, should you not purchase the Pipe Framing Kit. Please note, 2-inch EMT is the US trade name of the material, however the true outer diameter is 2.197" or 55.8mm.
Q: Do I need additional equipment for setup? A: The kit includes everything except pipes (Pipe Framing Kit sold separately), Back Cover and Back Cover Pipe Kit, Safety Baffles, and software for custom image warping, such as Immersive Display PRO v6.1.2.
Q: How far should the golfer hit from the impact screen? A: For the safety of the golfer and the impact screen, we recommend hitting a minimum of 10'-12' from the screen.
Q: How much space do I need for a curved enclosure? A: Be sure to account for at least 6"-7" of ceiling buffer space for ease of installation. When measuring width, make sure to leave 2"-3" of buffer space on each side to avoid the enclosure touching the side walls or other obstacles. The Curved C-Series Enclosure needs a minimum of 9.5" behind the enclosure for the rear fitting.
Q: Is this suitable for residential and commercial use? A: Yes, this enclosure is perfect for both high-end residential setups and commercial spaces.
Q: How many projectors are required? A: Only one projector is needed for this setup.
Metrics & specs to confirm
Enclosure Size9'H x 14'W, 9.5'H x 14.5'W, 10'H x 15'W, 9'H x 15'W, 9.5'H x 16'W, 10'H x 17'WEnclosure Depth8'D, 10'D, 15'DScreen MaterialPremium Golf Impact, High-Contrast Gray Golf Impact
Hitting distance: Use at least 10 feet from tee to impact screen for safer play and better screen life.
Rear clearance: Keep 12-16 inches of free, clear space behind the impact screen so the screen can move without rubbing against objects.
Frame planning: DIY frames use 1 inch EMT, and the outer frame is typically planned about 4 inches taller and wider than the screen dimensions for even tension.
What to verify is included
Core product: Confirm the selected model, size, length, material, software path, or configuration shown on this page.
Accessories and add-ons: Related simulator parts, mounts, cables, computers, projectors, software, or installation items are only included when explicitly listed.
Exact contents: Review the existing product description before checkout for any included/not-included notes.
Shipping & returns
Shipping: Carl's Place orders primarily ship by FedEx or UPS, and one order may arrive in more than one shipment depending on the items.
Freight items: Curved enclosure pipe kits and Built-In panels ship freight. Add lift-gate help when the delivery location cannot unload palletized freight or heavy boxes.
Returns and support: Keep packaging, verify all items after delivery, and contact us quickly if anything is missing, damaged, or not fitting as expected.
Room-fit support: We help confirm enclosure footprint, hitting distance, rear clearance, and side or ceiling protection before checkout.
Wearable component support: Carl's Place screen and enclosure materials are wearable components, so this page does not present them as a blanket warranty item.
Issue review path: If something seems unusual after delivery or setup, contact Golf Sim Genies with photos, setup details, dimensions, and order information so we can help review next steps.
Description
Carl's Place Curved Golf Simulator Enclosure Kit with Impact Screen
Use this enclosure page to confirm the bay footprint, screen or net choice, protection needs, and any separate simulator components you plan to pair with it.
Room clearance: Plan for safe swing space, at least 10 feet from tee to impact screen, and 12-16 inches of clear space behind the screen when using an impact screen.
Frame buffer: DIY and PRO enclosures need 2-3 inches of buffer on the sides and top; Curved enclosures need 2-3 inches on the sides and about 6 inches above.
Setup care: Use clean, unscuffed white golf balls and clean clubs to help protect the screen surface and reduce avoidable marks.
Full product details
Experience the ultimate indoor golf experience with the Carl's Place Curved Golf Simulator Enclosure Kit with Impact Screen, the first-ever do-it-yourself curved golf simulator kit. Featuring a unique curved impact screen, this enclosure creates an immersive environment with a wide field of view, offering unparalleled realism for any golf enthusiast.
Designed for durability and ease of installation, this kit is perfect for high-end residential setups or commercial spaces, bringing a luxurious and highly-immersive golfing experience to any setting.
Before purchasing, please view the Specifications tab to confirm that the Overall Enclosure Dimensions for the Listing Size that you have selected will be suitable for your space.
Please Note: The Carl's Place moveable crossbar is not compatible with the Carl's Place Curved Golf Simulator Enclosure.
Features
Curved Impact Screen The curved design enhances depth and realism, providing a wider field of view for an immersive golf simulation experience.
Durable Construction Crafted with premium materials, this enclosure is designed to withstand the rigors of regular indoor golf use.
User-Friendly Installation Step-by-step instructions make it easy to assemble, requiring only basic handy skills for setup.
Customizable Sizing Options Available in six standard sizes and customizable dimensions to fit your unique space.
Single Projector Setup Requires only one projector for seamless performance (additional software may be needed for custom image warping).
Overall Enclosure Dimensions are slightly larger than the Listing Size. Depths are true to size. Ensure the Overall Enclosure Dimensions will fit your space.
Buffer Space:Allow for 6"-7" of buffer space between the top of the Overall Enclosure Height and your ceiling for ease of assembly.
Custom Sizing: We can customize Curved Golf Simulator Enclosures down to the inch to fit a wide range of space requirements. Please contact support@golfsimgenies.com for a custom quote. Below is a full list of minimum and maximum Overall Enclosure Dimensions that are available.
EMT Requirements: Unless you have purchased the Pipe Framing Kitaccessory, you will need to purchase 2-inch EMT (electrical metal tubing) from your local hardware store to complete your frame. We will provide a pipe cut sheet that incudes the exact EMT dimensions that you will need, should you not purchase the Pipe Framing Kit. Please note, 2-inch EMT is the US trade name of the material, however the true outer diameter is 2.197" or 55.8mm.
Q: Do I need additional equipment for setup? A: The kit includes everything except pipes (Pipe Framing Kit sold separately), Back Cover and Back Cover Pipe Kit, Safety Baffles, and software for custom image warping, such as Immersive Display PRO v6.1.2.
Q: How far should the golfer hit from the impact screen? A: For the safety of the golfer and the impact screen, we recommend hitting a minimum of 10'-12' from the screen.
Q: How much space do I need for a curved enclosure? A: Be sure to account for at least 6"-7" of ceiling buffer space for ease of installation. When measuring width, make sure to leave 2"-3" of buffer space on each side to avoid the enclosure touching the side walls or other obstacles. The Curved C-Series Enclosure needs a minimum of 9.5" behind the enclosure for the rear fitting.
Q: Is this suitable for residential and commercial use? A: Yes, this enclosure is perfect for both high-end residential setups and commercial spaces.
Q: How many projectors are required? A: Only one projector is needed for this setup.
Specs
Metrics & specs to confirm
Enclosure Size9'H x 14'W, 9.5'H x 14.5'W, 10'H x 15'W, 9'H x 15'W, 9.5'H x 16'W, 10'H x 17'WEnclosure Depth8'D, 10'D, 15'DScreen MaterialPremium Golf Impact, High-Contrast Gray Golf Impact
Hitting distance: Use at least 10 feet from tee to impact screen for safer play and better screen life.
Rear clearance: Keep 12-16 inches of free, clear space behind the impact screen so the screen can move without rubbing against objects.
Frame planning: DIY frames use 1 inch EMT, and the outer frame is typically planned about 4 inches taller and wider than the screen dimensions for even tension.
What's Included
What to verify is included
Core product: Confirm the selected model, size, length, material, software path, or configuration shown on this page.
Accessories and add-ons: Related simulator parts, mounts, cables, computers, projectors, software, or installation items are only included when explicitly listed.
Exact contents: Review the existing product description before checkout for any included/not-included notes.
Shipping & Returns
Shipping & returns
Shipping: Carl's Place orders primarily ship by FedEx or UPS, and one order may arrive in more than one shipment depending on the items.
Freight items: Curved enclosure pipe kits and Built-In panels ship freight. Add lift-gate help when the delivery location cannot unload palletized freight or heavy boxes.
Returns and support: Keep packaging, verify all items after delivery, and contact us quickly if anything is missing, damaged, or not fitting as expected.
Room-fit support: We help confirm enclosure footprint, hitting distance, rear clearance, and side or ceiling protection before checkout.
Wearable component support: Carl's Place screen and enclosure materials are wearable components, so this page does not present them as a blanket warranty item.
Issue review path: If something seems unusual after delivery or setup, contact Golf Sim Genies with photos, setup details, dimensions, and order information so we can help review next steps.
